Imiba eyi-10 ePhakamileyo kwi-Adhesive yeTayile

Imiba eyi-10 ePhakamileyo kwi-Adhesive yeTayile

Ukunamathiswa kwethayile yinxalenye ebalulekileyo yofakelo lwethayile, kwaye imiba eyahlukeneyo inokuvela ukuba ayisetyenziswanga okanye ayilawulwa ngokufanelekileyo. Nantsi imiba eyi-10 ephezulu eqhelekileyo kwizicelo zokuncamathelisa iithayile:

  1. Ukubambelela kakubi: Ukungadibanisi ngokwaneleyo phakathi kwe-tile kunye ne-substrate, okubangelwa iithayile ezikhululekile, eziqhekekileyo, okanye ezilungele ukuvela.
  2. Ukuthontelana: Ukuwohloka okugqithisileyo okanye ukutyibilika kweethayile ngenxa yokungaguquguquki okuncamathelisayo okungafanelekanga okanye ubuchule bokusebenzisa, okukhokelela kumgangatho wethayile ongalinganiyo okanye izithuba phakathi kweethayile.
  3. I-Tile Slippage: I-tiles yokutshintsha okanye i-sliding out of position ngexesha lofakelo okanye ukunyangwa, kaninzi kubangelwa ukunyanzeliswa kwe-adhesive coverage okanye ukulungelelaniswa kwe-tile engafanelekanga.
  4. Ukomisa kwangaphambi kwexesha: Ukomisa ngokukhawuleza kwe-adhesive ngaphambi kokuba ukufakwa kwe-tile kugqitywe, okukhokelela ekunamatheleni okungahambi kakuhle, ubunzima bokulungelelanisa, okanye ukunyanga okungonelanga.
  5. Ukugquma okanye Izandi eziHolisiweyo: Iipokotho zomoya okanye i-voids evaleleke phantsi kweethayile, ezibangela izandi ezingenanto okanye iindawo “zemigqomo” xa zicofa, ezibonisa ukugquma okuncamathelayo okungonelanga okanye ukulungiswa kwe-substrate engafanelekanga.
  6. Iimpawu zeTrowel: Iingqungquthela ezibonakalayo okanye imigca eshiywe ngasemva kwi-trowel ngexesha lokusetyenziswa kwe-adhesive, echaphazela i-aesthetics yofakelo lwe-tile kunye nefuthe elinokubakho kwi-tile leveling.
  7. Ubunzima obungahambelaniyo: Ukwahluka kobunzima bokuncamathelisa phantsi kweethayile, okukhokelela kumgangatho ongalinganiyo wethayile, i-lippage, okanye ukwaphuka okunokwenzeka.
  8. I-Efflorescence: Ukwenziwa kweediphozithi ezimhlophe, ezinomgubo kumphezulu weethayile okanye amalungu e-grout ngenxa yokufuduka kweetyuwa ezinyibilikayo ukusuka kwinto encamathelayo okanye kwi-substrate, edla ngokwenzeka emva kokunyangwa.
  9. I-Shrinkage Cracks: Ukuqhekeka kwi-adhesive layer ebangelwa yi-shrinkage ngexesha lokunyanga, okukhokelela ekunciphiseni amandla ebhondi, ukungena kwamanzi, kunye nokuchithwa kwe-tile.
  10. Ukumelana naManzi aManzi: Ukungonelanga kweempawu zokuthintela amanzi okunamathelayo, okukhokelela kwimiba enxulumene nomswakama njengokukhula kwesikhunta, i-tile delamination, okanye ukuwohloka kwezixhobo ze-substrate.

Le miba inokuthotywa ngokujongana nemiba efana nokulungisa umphezulu ofanelekileyo, ukukhetha ukuncamathelisa, ukuxuba kunye nobuchule bokusebenzisa, ubungakanani betrowel nobunzulu benotshi, iimeko zokunyanga, kunye nokubambelela kwimigaqo yomvelisi kunye nezona ndlela zilungileyo zoshishino. Ukongezelela, ukuqhuba iitshekhi zokulawula umgangatho kunye nokujongana nayo nayiphi na imiba ngokukhawuleza ngexesha lofakelo kunokuncedisa ekuqinisekiseni ukufakwa kwe-adhesive tile kunye nokufakwa kwe-tile ixesha elide.


Ixesha lokuposa: Feb-07-2024